Spraycraft Concrete Resurfacing

Concrete Resurfacing

Decorative concrete driveway grey

Decorative pattern concrete driveway check

0418 960 021
Sydney Metro

Large tile driveway resurfaced

Dark grey resurfaced driveway

Resurfacing driveway with stencil and coloured borders

Spraycraft Concrete Resurfacing Sydney

Independently owned and operated by Greg Roberts, he has been in the building industry for over 30 years, giving him the knowledge and experience to provide the right advice and quality workmanship for your complete concrete transformation. We service all Sydney metropolitan suburbs.

What is concrete resurfacing?

Concrete resurfacing system 3000 is a spray on process applying cement based coloured concrete coatings onto your existing concrete completely transforming the appearance.

Concrete resurfacing - "the application process"

CRS 3000 is a spray on cement based polymer modified two part concrete resurfacing system

  • Cut all expansion joints along walls and driveway to remove any excess debris
    off concrete.
  • Cut existing cracks in concrete in preparation for treatment if required.
  • Grind all imperfections as required.
  • High pressure clean with 3500 PSI to remove all contaminants.
  • Once completely dry, treat cracks by filling with concrete crack mender.
  • When mender is cured, grind back to a level finish.
  • Spray one coat of polymer primer as a bonding agent.
  • Apply one base coat of CRS 3000 resurfacing cement by use of troweling or squeeging to rectify most imperfections on concrete.
  • If your concrete has existing stencil or pattern you must have a minimum of three layers of basecoat.
  • Pebble Crete or exposed aggregate has a minimum of two layers.
  • After basecoat is applied, all appropriate areas to the site will be masked up to prevent any overspray, whilst spray on technique is applied.
  • A stencil or hand taped design will then be laid on concrete.
  • Two top coats of CRS 3000 resurfacing cement (eg. Colour of driveway) will then be sprayed on. First coat for coverage and second coat for textured finish.
  • Once final coat is dry, all masking and stencil is removed.
  • Resurfaced concrete is then cleaned down to remove residue.
  • Last but not least a minimum of two coats of resurfacing sealer will be applied which significantly improves the appearance and value to your premises.

What is a polymer modifier?

A Polymer Modifier is a liquid substance and when mixed with cement increases the bonding strength, reducing permeability, increasing flexural, tensile, impact and abrasion strength improving the overall toughness of the cement

What is concrete crack mender?

Is a revolutionary two part hybrid urethane for filing cracks. Its MFG for deep penetration into the crack, not like epoxy which can pop out.

What is resurfacing sealer?

Sealer aids curing that promotes durability of the hardened surface coating and to aid surface cleaning maintenance by owners.